Chinese  |  English  |  Contact 
 
  Home   About   Product   News   Case   Job   Contact
 
   News
Company news
Industry news
Environmental information
000
深圳金都凹版-深圳市重点排污单位环境信息公开表
   News
深圳金都凹版工业有限公司2024年12月工业废水自行监测报告
深圳金都凹版工业有限公司2024年10月工业废水自行监测报告
深圳金都凹版工业有限公司2024年07月工业废水自行监测报告
   Contact
Address:No. 140,Tong Jia Da Dao,Gongming Office,Guangming new district,Shenzhen
Tel:+86-755 2741 0366
Fax:+86-755 2741 0366
Service hotline:
Mr.Li:13923439886
Mr.Ma:13922848353
Website:http://www.szjdgs.net

 
  Industry news
Add:Home > News > Industry news   
 
We teach you to extend the printing gravure roller life
Source:      Date:2016-8-25
Some flexible packaging plant in order to extend the life of the printing plate, it is not without its. Here, small make up suggest that you should pay attention to the following points in the use of the roller.
1, before use, please clean the layout of preservative oil and check the page without bumps, scratches and other problems.
2, the panel, which is to use special equipment for processing, the machine before no special circumstances do not re treatment if to Polish version and suggestions with sand paper 1000#, please do not use hard, sharp objects touch, planning layout.
3, the use of the use of roller special scraper, and firmly can not be replaced with other pieces of metal, scraper and layout should be based on the specific conditions of the printing press to maintain an appropriate angle and pressure.
4, after printing, the layout ink should be cleaned immediately, in order to prevent the ink residue in the net pit caused by blocking version.
5, do not touch with bare hands, handling and, to prevent the layout oxidation and scratch; especially in the summer to prevent sweat drops splash to layout. 6, the summer temperature, high humidity, save the version roll should not be placed in the version of the box. Storage layout should be clean, covered with a protective oil (suggested oil with 7#), with clean plastic film, blankets or corrugated paper from inside to outside wrapped and placed in ventilated, dry (temperature of 0 DEG to 30 DEG C, relative humidity < 65%) environment, and keep away from acid and alkali corrosive substances.
Click download